X4M200 Error: Failed to initialize XeThru device! Timed out waiting for device to switch profiles.

Discussion in 'Respiration Sensor' started by mmvb, Nov 20, 2018.

  1. mmvb

    mmvb New Member

    We recently received our new, second, X4M200 respiration sensor. XeThru Explorer recognizes the sensor and the installed firmware version.
    When clicking Apply on the settings screen we are prompted with "Error. Failed to initialize XeThru device! Timed out waiting for device to switch profiles."
    We've tried this on different computers (Windows and Raspberry Pi with the Module Connector example) to no avail. The Module Connector examples just hang on start or fail to connect when using this sensor.
    We tried this with the latest 1.6.8 firmware as well as rolling back to older firmware.
    Our other X4M200 sensor works fine, using the same firmware version.

    Any steps we could take to get the sensor to work?
     

    Attached Files:

  2. NSANGOU CHOUAIBOU

    NSANGOU CHOUAIBOU Active Member

    Hi mmvb,
    You can succesfully update the firmware of the sensor but it can't initialized, it is very strange. May be your firmware is corrupted.

    B.R,
    Chouaibou.
     
  3. Charlie Shao

    Charlie Shao Moderator Staff Member