X2 range

Discussion in 'X2 & X4 SoC' started by Seb, Apr 11, 2016.

  1. Seb

    Seb New Member

    Hello dear XeThru team,

    I'm very interested in the X2 chip. My application would require 1mm accuracy, and a range of about 40m (or even 45m). But 1 measurement each 300 ms is enough.

    I see in the Ancho module data sheet that the accuracy is about 4mm and the range 20m.
    Are these figures linked to Ancho, or to the X2 itself ?

    Thank you,
    Seb
     
  2. Olav Liseth

    Olav Liseth Administrator Staff Member

    Hi Seb,

    The maximum range for detecting an object depends on the link budget. Depending of the object and scenario, 1 mm accuracy at 40 meters is pushing it.

    The Ancho kit implements an RX amplifier which will increase the overall performance.

    Olav