Resources for X4M05

Discussion in 'X2 & X4 SoC' started by akashdeepsingh, Nov 1, 2019.

  1. akashdeepsingh

    akashdeepsingh New Member

    Hi. I am a beginner.

    I have an X4M05 sensor. I want to sample it at 1200 frames/second.
    1) Is this possible?
    2) Are there any resources available for it?
    3) Is there any MATLAB/Python code available for it?
     
  2. Allen Wu

    Allen Wu Moderator Staff Member

    Hi akashdeepsingh,

    This is a very good starting point for using XeThru sensors:
    https://www.xethru.com/community/resources/xethru-sensors-introduction.111/

    First, you can download XeThru Explorer and try it out with XeThru sensor.
    https://www.xethru.com/community/resources/xethru-explorer-for-windows.5/

    Then, download Anaconda and try out XeThru Module Connector Python example. There are also MATLAB examples.

    This is community resources page link:
    https://www.xethru.com/community/threads/welcome-to-the-xethru-community.410/

    Inside XeThru X4 Radar User Guide:
    https://www.xethru.com/community/resources/xethru-x4-radar-user-guide.149/
    Chapter 3.3 Calculating Maximum Frames Per Second, there is an equation on how to calculate Frames Per Seconds.

    Allen
     
    Charlie Shao likes this.
  3. Charlie Shao

    Charlie Shao Moderator Staff Member

    Just add a more detail explanation based on Allen's answer.

    1) It is possible to set the FPS to 1200.
    2) Discussion on this thread and X4 guide could be good references.
    3) Latest ModuleConnector python example on how to change X4 configuration.