I need resource of with matlab

Discussion in 'Module Connector (MC)' started by ZLH_S, Jul 10, 2018.

  1. ZLH_S

    ZLH_S New Member

    Hi ,
    friends of the community, I want to know about the MATLAB getting started tutorial.
    Help recommend.
    Thanks
     
    Last edited: Jul 10, 2018
    Aksel Johnsby likes this.
  2. Aksel Johnsby likes this.
  3. ZLH_S

    ZLH_S New Member

  4. Hi ZLH_S,
    Just use the example's codes in the "matlab" folder in your module connector. Make sure to use the latest version of the module connector and at least Matlab R2017.
    If you read the matlab codes, you will see that you need to add the paths for the necessaries folders.
    In addition to that, you need to install a compiler in your MATLAB, for example MinGW C/C++ compiler.
    If your MATLAB software is ok, the correct device type (x4m300, x4m200, x4m03, x2m200) is connected to your computer USB port (according to the matlab example code you want to run), and the device COMPORT is set, the code and the connected module or development kit will work flawlessly.
    Please take a look at this thread :
    https://www.xethru.com/community/threads/x4m200-matlab-examples.430/#post-1987

    B.R
     
    Last edited: Jul 13, 2018 at 6:36 AM