Found difficulty in connecting x4m300

Discussion in 'XeThru Explorer' started by Jimmy Y. Huo, Mar 17, 2017.

  1. Jimmy Y. Huo

    Jimmy Y. Huo New Member

    To whom it may concern:

    I am not able to have the newest Explorer work as expected to detect the x4m300 sensor, but the green LED is continuously on.

    But x2m200 works perfectly fine.

    Could I use some help here ?

  2. Hi Jimmy,
    I have tested the newest Xethru Explorer on windows 10 with both X2m200 and X4m300 sensors and it works.
    Xethru Explorer has devices auto discovery feature, it should discover both X2m200 and X4m300 sensors if the driver-atmel-bundle-7.0.888 is well installed.
    Try to check if your X4m300 sensor is recognized by your comptuter. It can help to go further in your investigations.

  3. Marius Lind Volstad

    Marius Lind Volstad Member Staff Member


    It looks like you've got the X4M03 module there. It comes with the XeThru Embedded Platform firmware which is intended to be used for raw radar frame capturing with Module Connector, and e.g. Matlab for processing.
    XeThru Explorer will not work with XeThru Embedded Platform.

  4. Olav Liseth

    Olav Liseth Administrator Staff Member