Creating a Network

Discussion in 'General' started by Christian Laughton, Mar 18, 2016.

  1. Christian Laughton

    Christian Laughton New Member

    Hi all,

    I'm interested in knowing if you can have a network of X2 chips working together on a network over cat5 or fiber using nessecary converters, I know the device is USB at the moment but with USB you have a problem with cable length restrictions.


    For example could I make these devices run over 800m all on the same network speaking to a standalone server, either with fiber networking or cat5.

    If this is in the documentation somewhere and I have missed it, sorry !
     
  2. IngarH

    IngarH Moderator Staff Member

    Hi Christian.

    At the moment we do not have any direct cat5 solution. One possible solution could be to use USB Cat5 extenders. We haven't used them ourselves but it should work.