Access raw data using C#

Discussion in 'Tutorials' started by Igor.12, Jan 23, 2019.

  1. Igor.12

    Igor.12 New Member

    Good morning,

    I would like to know if it is possible to access the raw data from x4m200 and x4m03 using C# language,
    Do we have some example from it?

    Thank you very much!
    I.S.B.
     
  2. Charlie Shao

    Charlie Shao Moderator Staff Member

    Hi,
    Unfortunately, XeThru does not have official support for C# .net. C++ should be the most efficient way to access sensor module. In fact, the Module Connector Matlab and python libraries are wrappers of C++ library, so the speed you get radar data has no difference. Script languages are easy to manipulate data but not very efficient, especially when you want to plot data. When you do digital signal processing, the language becomes critical, a project has "real-time" requirement is suggested to use C/C++, C#.net may not be a good option. Anyway, this is just my personal advice, maybe you have special reasons to choose C#.
     
    NSANGOU CHOUAIBOU and Igor.12 like this.
  3. Charlie Shao

    Charlie Shao Moderator Staff Member

    Please try to build examples at original ModuleConnecotr folder.
     
  4. Charlie Shao

    Charlie Shao Moderator Staff Member

    which step are you stuck at?
     
  5. Charlie Shao

    Charlie Shao Moderator Staff Member

  6. Charlie Shao

    Charlie Shao Moderator Staff Member

    See prerequisite of this example: This example should be placed in ModuleConnector/examples.