about pulsedoppler

Discussion in 'General' started by chen yan fang, Nov 30, 2018.

  1. chen yan fang

    chen yan fang New Member

    I want use X4M300 to Obtain pulsedoppler.
    QUESTION 1 :in the X4M200_X4M300_plot_pulsedoppler_matrices.m:
    using fuctiong 'read_message_pulsedoppler_byte' obtain pulsedoppler, the range of frequency is -8.5Hz to 8.5Hz, but the frequency step is only 0.53125Hz, the step is too large, is there any way to reduce frequency step and increase frequency resolution?

    question 2: the default fps of X4M300 is 17, is there any way to modify the parameter of X4M300 ?
     
  2. Charlie Shao

    Charlie Shao Moderator Staff Member

    Hi Chen,

    The configuration of pulse-doppler analysis in X4M200/X4M300 is fixed.
    If you need a custom configuration, you have to start from radar baseband data.